1.3.2 Pictographs
Pictographs used in the document indicate useful information.
Note
Tip
1.3.3 Stickers on the product
This section describes all the stickers on the product along with their meaning.
Mod. DUO 11 ATEX
P/N
PK D59 905 C
S/N
23679713
Oil
P3 0.5 l
S(N2) max. 10.5 m /h
n max. 3600 1/min
Mass 15.3 kg
3
Made in Germany 2019/02
D-35641 Asslar
VACUUM
II 3/3G Ex h IIC T4 Gc X
+12 °C T +40 °C
a
≤
≤
Rating plate
The rating plate of the rotary vane pump is located on the front right-
hand side next to the sight glass.
Motor rating plate (not shown)
The motor rating plate is located on the respective motor.
ACHTUNG!
Vor dem Einfüllen des Öles Drehrichtung der
Pumpe prüfen!
ATTENTION!
Before filling in the oil check direction of
rotation of the pump!
ATTENTION!
Avant remplir l’huile vérifier le sense de rotation
de la pompe!
Sticker (yellow)
Attention! Check the direction of rotation of the rotary vane pump be-
fore filling with operating fluid.
Vor Inbetriebnahme Pumpe mit Öl
füllen
Fill the pump with oil before putting
into operation
Remplir la pompe d’huile avant la mise
en route
Sticker (red)
Fill the rotary vane pump with operating fluid before commissioning.
Arrow indicating direction of rotation
The direction of rotation arrow indicates the required motor rotation di-
rection.
warranty seal
Closure seal
The product is sealed ex-factory. Damaging or removing a closure seal
results in loss of the warranty.
Warning hot surface
This sticker warns of injuries caused by high temperatures in case of
touching without protection during operation.
Tbl. 1:
Stickers on the product
About this manual
8/58
