2
3
2
The cover can be removed without disconnecting the control panel, the cable is long
enough. To fully release the cover, disconnect the cable and remove the control panel con-
nector.
4
5
6
Reassembly
► Follow the disassembly steps in reverse.
5.4 Calibrated leak replacement (accessory)
► Every time a calibrated leak is replaced, update the calibrated leak setting (see chapter “Calibrat-
ed leak setting” in the operating instructions.)
This operation can be carried out with the information featured on the calibrated leak rating plate
or the calibrated leak certificate supplied with the leak.
Service - Maintenance
13/30
