Quick guide PY X-M(A)-05/ PY X-M(A)-10
PY X-L-15/ PY X-LA-15
02/2022
4/10
086050003
en
Electrical connection: (Circuit board in lower part)
PY X-MA-05/ PY X-MA-10/ PY X-LA-15
PY X-M-05/ PY X-M-10/ PY X-L-15 (CPR)
AC version
DC version
Volume control
Tone selector switch
Volume control
Operating voltage connection
Tone
selector
switch
Operating voltage
connection for
sounder
Operating voltage
connection for flashing
light
Setting the flash frequency
The flash frequency is set using the
S1
switch on
the board in the lens, see table below.
Operating voltage connection for
sounder
Operating voltage connection
for flashing light
S2/ S3:
Setting for common/ separate control of the light/ sounder component
(see digital operating instructions,
1 Hz
0.75 Hz
*
0.5 Hz
0.1 Hz
*
Factory setting
Setting the tone types (PY X-MA-05 and PY X-MA-05)
S1
switch setting on the connection board in lower part should be as follows:
2
Sawtooth
161
Continuous tone
9
DIN 33404-3
(emergency signal)
162
Interrupted tone
*
131
Alternating tone
UK BS5839-1,
Level crossing fire alarm
163
Interrupted tone
160
Continuous tone (horn)
164
Slow whoop
*
Factory setting
AC:
DC:
AC:
DC:
AC:
DC:
