Operating instructions PY L-S-TL/ PY L-S-TLA
09/2020
Page 7 /7
086200016b
en
6.4 Tone settings (on the driver board in the upper part)
The desired tone can be selected using the tone selector switch
S3
(on the driver board in the upper part). The
possible tones are described in the tone type table in the Annex.
The tone is generated after the supply voltage is applied.
DC version
AC version
Volume control
Tone selector switch
S3
7. Accessories
Item No.
Designation
28300000002
Sealing plug, 4-pack
28912000000
Spare locking bolt, 4-pack
8. Maintenance, service, repairs
➢
during all work on the device.
The device requires no special maintenance.
➢
Carry out external cleaning using a weak soap solution without using any solvents.
➢
Only replace components using original spare parts.
➢
Only have repairs carried out at the manufacturer's premises.
Conversions, modifications, improper and impermissible use as well as failure to observe the notes in these
operating instructions shall void any warranty.
9. Decommissioning, dismantling and disposal
➢
during all work on the device.
➢
Only properly qualified personnel should dispose of old devices in accordance with applicable environ-
mental regulations.
Old devices are also professionally disposed of by Pfannenberg. Delivery to one of our manufacturing fa-
cilities shall be free of charge.
S3
S3
