Pfaff POWERLINE 3741, Instruction Manual, Page: 115 / 156

Adjustment
107
Group P
arameter
Description User level S
et
ting range
S
et value
7
706 Needle position 6 (start cutting signal) B,C 0 - 359 214
707 Start thread tension release B,C 0 - 359 214
710 Needle position 3 (needle raised) B,C 0 - 359 0
715 Switch-on time (ms) for thread wiper B,C 0 - 2550 40
716 Switch on delay time for thread wiper [ms] B,C 0 - 2000 120
718 Standstill brake tact ( 0 = brake off) B,C 0 - 40 20
722 Acceleration ramp for sewing motor
1 = fl at
50 = steep
B,C 1 - 50 40
723 Brake ramp for sewing motor
1 = fl at
50 = steep
B,C 6 -60 45
727 Bobbin monitoring effected
ON = sewing motor stop and signal lamp on
OFF = signal lamp on
B,C ON - OFF ON
729 Start delay after presser foot lowered B,C 10 - 2550 140
730 Lift delay for presser foot after seam end B,C 0 - 2000 100
750 Increased standstill brake in case of
docu-seam error
B,C 0 - 100 70
760 Remaining no. of stitches after response of
bobbin thread monitor during monitoring (fi xed
value x 10)
A,B,C 1 - 250 20
770 Lift delay for presser foot at pedal position "-1 " B,C 10 - 2000 100
778 Blowing time for cleaning thread monitor B,C 10 - 5000 100
780 Function of "tack suppression" key
1 = Bartack inversion (once)
2 = Bartack suppression (all bartacks ooo
switched off)
3 = Reverse move to needle position ooo
step by step
4 = Edge trimmer on /off
5 = programmable tack on / off
B,C 1 - 5 1