Pfaff creative 4.5, Owner'S Manual, Page: 71 / 152

4:23
Sewing mode
&RPPRQVHZLQJ
pop-ups
6\VWHPEXV\
:KHQWKHPDFKLQHLVORDGLQJVDYLQJPRYLQJÀOHV
or anything that takes time, an hour glass is shown.
Bobbin thread low
When the bobbin thread is running low, a pop-up
message appears giving you an indication that the
bobbin needs to be changed soon. This gives you
an opportunity to plan where to stop sewing and
change the bobbin. If you want to continue sewing,
touch the foot control without closing the pop-up.
When the bobbin is replaced with a full one, touch
OK in the pop-up.
Check needle thread
The machine stops automatically if the needle
thread runs out or breaks. Re-thread the needle
thread, close the pop-up and start sewing again.
5HPRYH6HQVRUPDWLFEXWWRQKROHIRRW
The Sensormatic buttonhole foot needs to be
removed before doing any of the following:
• Sewing a stitch that is not a buttonhole.
• Sewing a buttonhole that can not be sewn with
the Sensormatic buttonhole foot.
• Sewing an adjusted buttonhole saved without
the Sensormatic buttonhole foot in your
Personal menu.
Machine needs to rest
If the machine stops and this pop-up appears on
the screen, the machine needs to rest. When the OK
icon is enabled you can resume sewing. The sewing
results will not be affected.