Pfaff creative 4.5, Owner'S Manual, Page: 132 / 152

9:12
Embr
oidery mode - stitch-out
&KDQJHWKUHDGFRORU
When it is time to change the needle thread, the machine
stops and the upper thread is cut. Change the spool and
re-thread the machine. The next recommended color is
shown in the pop-up.
Cut thread end
If Cut jump stitches is not activated in Machine settings
in the Settings menu, the machine will stop after
stitching a few stitches. Cut the thread and press start/
stop to continue embroidering.
(PEURLGHU\LVÀQLVKHG
:KHQWKHHPEURLGHU\LVÀQLVKHGDSRSXSZLOODSSHDU
on the screen. Touch OK to keep the design(s) loaded
and stay in Embroidery stitch-out.
&KDQJHWR&XWZRUN1HHGOHRSWLRQDODFFHVVRU\
Some cutwork designs can be stitched out using the
optional accessory PFAFF ® Embroidery Cutwork Needle
Kit, (P/N 820 945-096). These designs are marked with a
cutwork needle symbol in the creative™ 4.5 Embroidery
Collection. When the machine stops and this pop-up
message is shown, insert the corresponding cutwork
needle. Touch OK and press the Start/Stop button to
resume.
Note: These cutwork designs can also be stitched out without
the cutwork needles, but will then have to be cut manually.
Machine needs to rest
If the machine stops and this pop-up appears on the
screen, the machine needs to rest. When the OK icon is
enabled you can resume embroidery. The embroidery
results will not be affected.