Pfaff Creative 2134 Owner'S Manual Download Page 63

Page: 63 / 98

4:9

Sewing

Straight stitch

Stitch 1 is the basic straight stitch in center needle position. The stitch

length can be increased up to 6 mm. Change the needle position of the

straight stitch to sew in a zipper or topstitch along the edge of a collar.

Your Pfaff creative 2134 has 19 needle positions that can be adjusted

with the stitch width -/+ buttons (51).

Tip

: Use the “needle up / down” button to easily pivot at collar points. You

can also just tap on the foot control to set the needle in the down position.

Three-step Zigzag stitch – No 4

Stitch no 4 can be used to overcast raw edges. Make sure the needle

pierces the fabric on the left side and overcasts the edge on the right

side.

Stitch number 4 can also be used as an elastic stitch to add elastic to

pajamas, skirts and sportswear.

Summary of Contents for Creative 2134



































































































Search results

Summary of Contents for Creative 2134

Reviews:

Related manuals for Creative 2134

Brands by name

Popular brands

Pfaff Creative 2134, Owner'S Manual

Search results

Summary of Contents for Creative 2134

Reviews:

Related manuals for Creative 2134

Brands by name

Popular brands