Pfaff Creative 2134 Owner'S Manual Download Page 25

Page: 25 / 98

2:7

Preparations

Changing the needle

Switch off the main switch

To remove:

Lower the presser foot and set the needle to its highest

position. Loosen the needle screw and pull the needle out downwards.

To insert:

The

at side of the needle must face to the rear. Keep the

presser foot down and insert the needle, pushing it up as far as it will

go. Hold the needle and tighten the needle screw

rmly.

Bobbin winding

Preparing the machine for bobbin winding

Place an empty blue bobbin on the bobbin winder aligning the small

rectangular hole on the bottom side of the bobbin with the small pin on

the bobbin winder. The Pfaff logo is facing up.

Push the bobbin to the right.

Note

: The bobbin can only be wound if it is moved fully to the right.

Summary of Contents for Creative 2134



































































































Search results

Summary of Contents for Creative 2134

Reviews:

Related manuals for Creative 2134

Brands by name

Popular brands

Pfaff Creative 2134, Owner'S Manual

Search results

Summary of Contents for Creative 2134

Reviews:

Related manuals for Creative 2134

Brands by name

Popular brands