Safety
1 - 2
1
.03
Safety symbols
Danger!
Points to be observed.
Danger point!
Danger of injury to operating or specialist personnel!
Hot surface!
Danger of burns to operating or specialist personnel!
Electric voltage!
Danger to operating or specialist personnel from electric voltage!
1
.04
Important points for the user
●
This Instruction manual is a component part of the machine and must be available to the
operating personnel at all times.
●
The operating and specialist personnel are to be instructed as to the safety equipment of
the machine and with regard to safe working methods.
●
It is the duty of the operator to only operate the machine when it is in perfect running
order.
●
It is the obligation of the operator to ensure that none of the safety mechanisms are
removed from the machine or deactivated.
●
It is the obligation of the operator to ensure that only authorized persons operate and
work on the machine.
●
The user must make sure there is no high-frequency welding equipment being operated
in direct proximity to the machine that exceeds the EMC limit values according to
EN 60204-31
for the machine.
Further information can be obtained at the point of sale.
1
.05
Operating and specialist personnel
1
.05.01
Operating personnel
Operating personnel are persons responsible for the preparation, operating and cleaning of
the machine as well as eliminating any faults arising.
The operating personnel are obliged to observe the following points and must:
●
always observe the Notes on safety in the Instruction manual!
●
never use any working methods which could limit the level of safety in using the
machine!
●
also ensure that only authorized persons have access to the potentially dangerous area
around the machine!
●
always immediately report to the person responsible any changes in the machine which
may limit its safety!