10 - 4
Heat sealing
Fig. 10 - 07
●
Connect the machine to the power supply (see
chapter 8.01 Connecting the machine to
the power supply
).
●
Set operating mode "
0
", see
Chapter 7.05 Selection switch for the operating mode
.
In operating mode "
1
" the feed rollers start as soon as the machine is switched
on at the mains switch.
●
Switch the machine on at the mains switch, see
Chapter 7.02 Mains switch
.
●
Set the operating direction at forwards, see
Chapter 7.06 Selection switch for the
operating direction.
●
Adjust the heat-sealing temperature and speed, see
Chapter 9.07 Adjusting the heat-
sealing temperature and speed.
To avoid damage to the material the following steps must be carried out in
quick succession after the pre-selected heat-sealing temperature has been
reached.
●
Align and insert the material strips as described in the preceding chapters
●
Lower the feed roller with lever
1
.
●
Engage the hot wedge with lever
2
(the feed rollers start).
During the heat-sealing process the machine must always be operated by hand.
1
2
10.
04
Heat-sealing the workpieces
10.
04.01
Guiding the machine manually