Controls
7 - 7
7
.11
Edge trimmer -726/05 for 591
Fig. 7 - 11
1
2
3
6
7
Keep your hands away from the moving knife! Danger of injury!
Switch on knife drive:
●
By turning lever
1
the knife is moved into its operating position.
Switch off knife drive:
●
By pressing lever
2
or key
3
the knife is put out of operation.
Switch on edge guide:
●
After lever
4
has been pressed, the edge guide moves into its starting position.
Switch off edge guide:
●
By raising lever
5
, the edge guide is put out of operation.
Changing the knife:
The following work may only be carried out by technical staff or by persons who
have been properly instructed.
●
Switch off the machine.
●
Loosen screw
6
and remove knife
7
.
●
Insert new knife and push it close to needle plate insert.
●
Tighten screw
6
.
●
Adjust the knife according to
Chapter 11.06.01 Position of the knife to the needle plate
and
Chapter 11.06.02 Knife crosswise to sewing direction
.
4
5