Pfaff 3822-2/42, Instruction Manual, Page: 50 / 152

Input
11 - 7
11
.01.04
Seam program input with the "Creating/adjusting a program" function
With this function the seam program is entered by sewing a sample. A new program is
always created, i.e. if an existing program is selected, this will be overwritten.
●
Switch on the machine.
●
Call up the input mode.
●
Call up the "teach-in" function.
●
Carry out the basic settings and conclude with the "Enter" function, see Chapter 11.01.01
Basic settings for seam program input.
Before sewing starts the following displays and functions appear on the screen.
1
●
Enter the functions for the seam start, see Chapter 10.01.01 Entering the seam start
and seam end in the manual sewing mode.
●
Enter the fullness, see Chapter 9.08 Inputting fullness.
●
Enter the maximum speed for the current seam section.
●
If necessary, use the keyboard to switch on the condensed stitches function for the
current seam section, see Chapter 7.07 Keyboard.
●
If necessary switch on the reverse sewing function for the current seam section using
the keyboard, see Chapter 7.07 Keyboard .
●
Sew the first seam section using the pedal function.
The number of stitches in the current seam section is counted and shown on the display.