Adjustment
12 - 36
12.
06
Tension unit control
Requirement
When the roller presser touches the material
1. For materials up to 2 mm one tension unit should be active ( magnet activated )
2. For materials over 2 mm the second tension unit should be connected ( magnet
drops out )
Fig. 12 - 33
●
Activate magnet
1
.
●
Adjust magnet
1
( screws
2
) according to
requirement 1
.
●
Adjust switch lug
4
( screw
5
) according to
requirement 2
.
This is a basic setting and can be changed depending on the material thickness.
1
2
0.5 mm
3
