Pfaff 3588-04/020, Instruction Manual, Page: 140 / 196

Adjustment
13 - 41
13
.06.08
Aligning the die
Requirement
When the folder is lowered and the pocket plate is raised at the same time,
1. the bottom edges of the die’s 1 strips must be at a distance of approx. the thickness
of the fabric under the underside of the pocket plate.
2. and they must be positioned on all sides at the same distance of 0.3 to 1 mm
(depending on the fabric) to the pocket plate edges.
●
Align the bottom edges of the die’s 1 strips with the underside of the pocket plate via
screws 2 (nuts 3 ).
●
Turn damper 9 (nut 10 ) - see Fig. 13-35a - according to requirement 1 .
●
Align die 1 (screws 4 ) according to requirement 2 .
Fig. 13 - 36
4
4
4
2
3
3
3
2
2
1