Pfaff 3588-04/020, Instruction Manual, Page: 126 / 196

Adjustment
13 - 27
13
.05.24
Thread check spring and slack thread regulator
Requirement
1. The stroke of thread check spring 5 must be completed when the needle point
penetrates the material (travel of the spring approx. 7 mm ).
2. When the thread loop is at its largest when going round the hook, the thread check
spring 5 must be lifted slightly above support 1 .
●
Adjust support 1 (screw 2 ) according to requirement 1 .
●
Move slack thread regulator 3 (screw 4 ) according to requirement 2 .
For technical reasons, it may be necessary to deviate from the travel of the
spring and/or the spring tension indicated here.
Fig. 13 - 25
4
-
+
3
5
2
1
2
1