Adjustment
25
13
.05.10
Test cut
Rule
The blade should be parallel to the thread catcher and both threads must be cut properly.
O
Move the needle bar to b.d.c. and activate the field core
1
.
O
Turn the handwheel (direction of rotation) until the thread catcher
2
is at its front turning
point.
O
Pull a doubled-up length of thread into the thread catcher cutout
2
and carry out a test
cut by continuing to turn the handwheel.
O
Check that both threads have been cut properly.
O
Readjust the thread catcher
2
accordingly if necessary, see chapter
13.05.07 Aligning
thread catcher laterally
.
Fig. 13 - 20
2
1
Summary of Contents for 333-712/02
Page 29: ...Notes...
