Pfaff 1525-g, Instruction Manual, Page: 31 / 58

9 - 1
Setting up
PFAFF 1526
● Set needle bar at top position and loosen
screw
1
.
● Push the needle fully in (the long groove
of the left needle must face to the right
and that of the right needle to the left).
● Tighten screw
1
again.
5
8.012
9 Setting up
All instructions and regulations in this instruction manual must be observed.
Special attention must be given to all safety regulations!
All setting-up work must only be done by personnel with the necessary train-
ing. For all setting-up work the machine must be isolated from its power supply
by turning off the on/off switch or removing the machine plug from the electric
power socket!
9
.01
Inserting the needle
Fig. 9 - 01
1
58.048
Fig. 9 - 02
1
Switch the machine off!
Danger due to unintentional starting of the machine!
Only use needles from the system intended for the machine, see
Chapter 3
Specifications.
PFAFF 1525
● Set needle bar at top position and loosen
screw
1
.
● Push the needle fully in (the long needle
groove must face to the left).
● Tighten screw
1
again.
If the needle bar is adjusted accordingly, it is also possible to use needle sys-
tem
134
.
The choice of needle depends on the model of the machine and the thread and
material used for sewing (see
Chapter 3, Specifications
).