8 - 8
Installation and commissioning
8
.05
Basic position of the machine drive unit
8.
05.01
On machines with Quick-EcoDrive and control unit P70ED
●
Switch on the machine.
●
Press the TE/speed key twice to select the input mode.
●
Select parameter "798" by pressing the corresponding
+/- key
, and select service level
C,
see
Chapter Selecting the user level
in the instruction manual for the control panel.
●
By pressing the corresponding
+/- key
select the parameter "799" (Selecting the machine
class).
●
Press the corresponding
+/- key
to set the value for the parameter at "3".
●
By pressing the corresponding
+/- key
, select parameter "700".
●
Sew a stitch by operating the pedal.
●
Turn the balance wheel in the sewing direction until the descending needle is level with
the top edge of the needle plate.
●
Conclude the adjustment of the sewing motor by pressing the
TE/Speed key
.
8.
05.02
On machines with Quick-PicoDrive and control unit P41 PD-L
●
Switch on the machine.
●
Call up the parameter input by pressing the
scroll key
.
●
Press the
TE key
to switch the function keys to input function (LED in the TE key is
illuminated).
●
Press the corresponding
+/- keys
to select parameter "
798
" and select the service level
C
,
see chapter Selecting the User Level in the separate instruction manual for the control
panel.
●
Select parameter "
799
" by pressing the corresponding
+/- keys
.
●
Check whether the value is set at "
5
" and alter if necessary.
●
Switch the machine off and then on again.
●
"
Pulley
" appears on the display.
●
Call up the parameter input by pressing the
scroll key
.
●
Press the
TE key
to switch the function keys to input function (LED in the TE key is
illuminated).
●
Press the corresponding
+/- keys
to select parameter "
798
" and select the service level
C
.
●
Select parameter "
800
" by pressing the corresponding
+/- keys
.
●
Check whether the value is set at "
1
" (balance wheel turns towards operator) and alter if
necessary.
●
Press the
scroll key
until "
Pulley
" appears on the display.
●
If the pedal is operated, the control unit carries out a teach-in operation.
●
The machine runs at low speed until the teach-in operation is completed. This operation
cannot be interrupted.
●
After the teach-in operation, the "
Pulley
" disappears from the screen - display returns to
standard.
●
Select parameter "
700
" by pressing the
+/- keys
.
●
Sew one stitch by operating the pedal.
●
Turn the balance wheel in the direction of rotation until the needle point, descending from
above, is flush with the top edge of the needle plate.
●
Conclude the adjustment of the sewing motor by pressing the scroll key.
8
.04
Switching the machine on/off
●
Switch the machine on (see
Chapter 7.01, On/off switch
).
Summary of Contents for 1525-g
