Mounting and commissioning the machine
8 - 1
8
Mounting and commissioning the machine
The machine must only be mounted and commissioned by qualified
personnel! All relevant safety regulations are to be observed!
If the machine is delivered without a table, it must be ensured that the frame
and the table top which you intend to use can hold the weight of the machine
and the motor, even while sewing.
8
.01
Mounting
The necessary electricity supply must be available at the machine’s location.
There must be a stable and horizontal surface and adequate lighting at the
machine’s location.
Due to reasons of packaging, the table top is lowered for transport.
The following is a description of how to adjust the height of the table top.
8
.01.01
Adjusting the table-top height
●
Loosen screws
1
and
2
and set the desired table-top height
●
Tighten screws
1
well.
●
Adjust the position of the pedal so that you can operate it comfortably and
tighten screw
2
.
Fig. 8 - 01
1
1
2
