7 - 6
Controls
7
.09.02
Operation-mode keys
There are two operation modes. The selected mode is indicated by the luminous diode of
the respective key.
SEWING
mode
ENTER
mode
7
.09.03
Function keys
Arrow keys
( right / left )
- Change menu bars
- for positioning the cursor when entering several values in one line
Plus / Minus
keys
- for increasing or decreasing input values
Esc key
- for interrupting functions without assuming the value entered
- for returning to superordinate menu functions
- for error acknowledgement following an error message
Clear key
- set the input value to 0
- for error acknowledgement following an error message
Enter key
- for confirming an input value
- for error acknowledgement following an error message
7
.09.04
Number keys
Below the display there is a bar with number keys ( 1 - 0 ).
Depending on the current operating mode, these keys have the following functions:
- carrying out the function shown by the symbol displayed above the number key
- entering a numerical value
- selecting functions or the next menu level
Double click
= press the key twice in rapid succession
Esc
Clear
Enter