Pfaff 1180 series, Supplement To The Instruction Manual, Page: 5 / 32

Controls
5
2 Controls
2
.01
Puller functions
Engaging/disengaging the puller
●
Raise the puller drive unit 1 until it locks
into place and swing puller arm 2 back as
far as possible. To engage the puller,
follow the instructions in the reverse
order.
Switching the puller on/off
●
The puller is automatically switched on or
off when the puller unit is engaged or
disengaged.
Setting the puller feed motion
●
The feed motion of the puller is set by
means of parameters (see Chap. 1.06
Parameter settings and the Motor
Instruction Manual)
Fig. 2 - 01
1
2
2
.02
Aligning the puller
Puller crosswise to sewing direction
●
Loosen screw 1 .
●
Align puller 2 to the seam.
●
Tighten screw 1 .
Height of the puller roller
●
Loosen screw 3
●
Align puller 2 , so that there is a clearance
of approx. 0.3 mm between the puller
roller 4 and the cloth plate.
●
Tighten screw 3 .
4
Fig. 2 - 02
1
2
3