23
pewag levo hook
EN
3.3 Charging station and multi-
adapter
The following safety instructions refer both to the charging
station and to the multi-adapter.
• The connector plug must fit in the socket. The plug must
not be modified in any way. Do not use adapter plugs with
earthed electrical devices.
• Do not use the cable for purposes other than its designated
use, for instance to carry the charging station or to remove
the plug from the socket. Keep the cable away from heat, oil
and sharp edges.
• Do not use the charging station in the open air. Always store
at room temperature, protected from moisture and dirt.
4. Designated use and technical
data
levo hooks are designed exclusively for the lifting and
transporting of loads, which may be lifted and lowered via radio
control. The system is a connecting link between the crane
hook and the load and/or the lifting device.
4.1 pewag levo hook
Load
The hook may only be loaded at the bearing area and in a
vertical direction (fig. 1), with the maximum load capacity as
specified on the identification plate.
Operating temperature
The long-term permitted operating temperature range for the
basic set is -20 °C to +60 °C.
For the product variant load cell please refer to the
manufacturer‘s instructions.
Shock-loading
The hook may only be loaded vertically and must not be
subject to shock-loading. Collisions of the suspended hook
of any kind (when under load or when not under load) are not
permitted.
Protection class
IP 65 (except for radio control, charging station and multi-
adapter)
Safety factor against break
4:1
4.2 Battery
Nominal voltage
29,6 V
Capacity
3,4 Ah
Energy content
100,64 Wh
Weight
0,57 kg
Cell type
Li-Ion, rechargeable
Temperature control
Yes
Deep discharge
protection
Yes
Overcharge protection
Yes
Working temperature
-20 °C to +60 °C
(basic set, see section 4.1)
4.3 Radio control
Frequency
868 MHz (Europe), 915 MHz (USA)
Range
100 m
Battery
Button battery type CR2032, 3V
Certification
ETSI (Europe), FCC (USA)
Transmittance
Encoded AES 128 bit
4.4 Charger and multi-adapter
Operating voltage
115/230 V
Fuse
Microfuse 10 A, slow
Multi-adapter
Max. 10 in line
4.5 Labelling and identification
On the casing side of the levo hook, there is an identification
plate with the following information:
• Model
• Year of construction
• Serial number
• Load capacity
• Safety factor
• CE marking
• Manufacturer
The information on the identification plate must be legible at all
times.
F
F
fig. 1: The hook may only be loaded vertically
