9
DISPLAY BOARD - OPERATING INSTRUCTIONS
DISPLAY BOARD OPERATING INSTRUCTION
①
“ON/OFF” the power button:
Press the button 3 seconds to power off (Window
④
digital countdown displays 3, 2, 1,). Press again
(without delay), the power turns on.
②
Upper zone temperature setting up button:
Press one time, window
④
the set value will increase 1 degree Celsius in the original setting temperature,
the setting range according to customer requirements.
③
Upper zone temperature setting down button:
Press one time, window
④
the set value will reduce 1 degree Celsius in the original setting temperature, the
setting range according to customer requirements.
④
Window:
Display upper zone temperature.
⑤
Window:
Display lower zone temperature
⑥
Lower zone temperature setting up button:
press one time, window
⑤
the set value will increase 1 degree Celsius in the original setting temperature,
the setting range accordingly to customer requirements.
⑦
Lower zone temperature setting down button:
press one time, window
⑤
the set value will reduce 1 degree Celsius in the original setting temperature, the
setting range accordingly to customer requirements.
⑧
Lamp button:
Press the button, lights on / off switch. Press this button to cycle through the different internal light settings.
There are three light settings: Orang, White and Blue.
Open and close the door to check the lamp color and whether the lights stay on with the door closed
(Display Mode) or illuminate only when the door is open(Automatic Mode).
Display Mode:
The internal lights will stay constantly illuminated whether the door is open or closed
Automatic Mode:
The internal lights will illuminate each time the door is opened and fade off once the door is closed.
To change to between Display Mode and Automatic Mode, press and hold this lamp button for 1 seconds.
