Pevino PI24S-BP, User Manual

Page: 21 / 69

21
REVERSIBILITY OF THE DOOR
Warning: To avoid accidents during the process of changing the door, we recommend that you get assistance.
The glass door is heavy and may cause injury if dropped. Please turn off the power before reversing the door.
1.
Use knife to pry the six trunk- nails from left side of cabinet. Please be careful, don’t hurt the hands and don’t
damage the surface of cabinet (Picture 1)
2.
Open the door, use Phillips screwdriver to loosen the screws of upper and lower door hinge, and then remove
the door (Picture 2)
3.
Then use hexagon wrench to loosen the screws of upper and lower door hinge, remove the door hinge, and
then install upper door hinge at lower opposite side, install lower door hinge at upper opposite side (Picture
3)
4.
The upper and lower ends of the removed door are directly aligned with the door hinges on the left side of
the cabinet, adjust the door, and tighten the upper and lower screws with a Phillips screwdriver to complete
the door replacement. Then install six trunk-nails to right side (Picture 4 & Picture 5)
5.
After closing the door, check whether the probe on the door frame is aligned with the metal plate on the
cabinet. If it is not aligned, loosen the screws on the upper and lower door hinges and adjust the door until it
is aligned (Picture 6)
6.
Plug in the power, find the press sign, and slowly press twice, if the door can be opened, the reversible door
is successful.