12
INSTALLING IN CABINET
1. Place the wine cooler in the cabinet and adjust it to place it in perfect level.
2. Open the door, take out the accessory bag with the fixing plate, 2 inner hex screws and hex key. Now use the
hex key to tighten the fixing plate onto the lower left side of wine cooler.
3. Take 3 Phillips screws from the accessory bag. Use a Phillips screwdriver (not included) to screw the fixing
plate onto the cabinet at the lower left side of the wine cooler using one Phillips screw. Then tighten the other 2
Phillips screws onto the cabinet at the upper door hinge and lower door hinge.
(Notice: If the door has been reversed, the above instructions are to be followed mirrored/inverted. See how to
reverse the door in this manual.)
Summary of Contents for PI24S-BP
