PEUGEOT V-CLIC -, Workshop Manual

Page: 34 / 38

MISCELLANEOUS OPERATIONS
32
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
- Using a drift, remove the steering head cups.
- Using a drift, remove the steering headset
cone (1).
- Install the following new parts:
- The fork cone (1).
- The steering headset cups (2).
„ Steering system tightening method.
- Grease the cup bearing races.
- Fit 26 balls (1) for the upper cup and
29 balls (2) for the lower cup
(Diameter: 4 mm).
- Fit the fork into the steering column.
- Install the adjustable cone and tighten it (3).
- Loosen and then retighten the adjustable
cone.
- Fit the lock washer (4).
- Install the steering head locknut and tighten
it (5).
Tightening torque: 3 m.daN.
1
2
1
1
2
3
4
5