PEUGEOT Partner Origin, Handbook

Page: 27 / 128

25
INSTRUMENTS, CONTROLS and DISPLAYS -
Engine oil level indicator
When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
service information.
Flashing of the six squares and the
display of "max" indicate that the oil
level is too high, which could damage
the engine.
If the excess oil is con
fi rmed by a
check using the dipstick, contact a
PEUGEOT dealer without delay.
Your PEUGEOT dealer carries out
this operation after each service.
The reset procedure is as follows:
-
Switch off the ignition.
- Press and hold button 1 .
- Switch on the ignition.
The display begins a 10 second count-
down.
-
Keep button 1 pressed for 10 seconds.
The display shows [=0] and the span-
ner disappears.
Flashing of the six bars and the dis-
play of "min" indicate that the oil level
is too low, which could damage the
engine.
If the lack of oil is con
fi rmed by a
check using the dipstick, it is essen-
tial that the level is topped up.
Flashing of the six bars indicates a
malfunction of the oil level indicator.
There is a risk of damage to the
engine.
Consult a PEUGEOT dealer.
The level read on the dipstick or on
the indicator will only be correct if
the vehicle is on level ground and
the engine has been off for more
than 30 minutes.
Resetting the service indicator
Oil level too high
Oil level too low
Oil level indicator fault