PEUGEOT Partner Origin, Handbook

Page: 23 / 128

21
INSTRUMENTS, CONTROLS and DISPLAYS -
MONITORING OPERATION
A warning lamp on fi xed or fl ash-
ing, with the engine running, in-
dicates an fault in the operation
of the unit concerned. The illumi-
nation of certain warning lamps
may be accompanied by an audi-
ble signal and a message in the
screen. Do not ignore this warn-
ing: consult a PEUGEOT dealer
as soon as possible.
If the central STOP warning lamp
comes on when you are driving,
stop your vehicle immediately,
where it is safe to do so.
Central (STOP)
warning lamp
Engine oil pressure
and temperature
warning lamp
Linked to the central (STOP) warn-
ing lamp.
You must stop.
This warning lamp indicates one of
the following:
- low oil pressure indicated by the
message "Oil pressure insuf fi -
cient" in the screen.
- low engine oil level. Top up the
level.
- oil temperature too high. To lower
the oil temperature, reduce your
speed.
Illumination of the warning lamp is
accompanied by an audible signal.
Consult a PEUGEOT dealer.
Low engine coolant
level warning lamp
Linked to the central (STOP)
warning lamp.
This comes on for a few seconds
when the ignition is switched on.
Illumination of this warning lamp is
accompanied by an audible signal
and the message "Top up engine
fl uid level" in the screen.
You must stop as soon as it is safe
to do so.
Wait for the engine to cool before
topping up the level.
The cooling system is pressurised.
Parking brake, low
brake fluid level and
Electronic Brake Force
Distribution system
fault warning lamp
Linked to the central (STOP) warning
lamp.
This comes on each time the ignition
is switched on.
Illumination of this warning lamp is
accompanied by an audible signal
and a message in the screen indicat-
ing the cause of the warning:
-
"Handbrake on", if the parking
brake is applied or not fully re-
leased.
- "Brake fl uid level low" if there is
an excessive drop in brake fl uid
level (if the warning lamp remains
on even when the parking brake
is released).
- "Braking fault" is displayed to-
gether with the ABS warning
lamp, indicating a fault with the
Electronic Brake Force Distribu-
tion system. You must stop as
soon as it is safe to do so.
Consult a PEUGEOT dealer.
If a check is required, to prevent
any risk of burns unscrew the cap
by two turns to allow the pressure to
drop.
When the pressure has dropped, re-
move the cap and top up the level.
Consult a PEUGEOT dealer.
Linked to the warning lamps for:
- ''engine oil pressure and temper-
ature'',
- ''low coolant level'',
- "parking brake'',
- ''low brake fl uid level'',
- ''electronic brake force distribu-
tion system fault''.
Linked with the "coolant tempera-
ture" gauge.
You must stop if the lamp fl ashes
with the engine running.
Consult a PEUGEOT dealer.