PEUGEOT METROPOLIS 2019 Owner'S Manual Download Page 17

Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters

  15/24

PEUGEOT METROPOLIS

FR

GB

DE

IT

ES

NL

GR

SE

PT

FI

DK

CHECKS TO PERFORM BEFORE USE

The user must personally ensure that his vehicle is in good 

condition. Certain safety elements may show signs of 
damage even when the vehicle is not used. e.g. prologned 
exposure to bad weather can lead to oxidation in the 
braking system or a pressure drop in the tyres which can 
have serious consequences. In addition to a simple visual 
inspection, it is extremely important to check the following 
points before use. 

These checks only take a few minutes and help 
to keep your vehicle in good condition, for 
optimum use combining reliability and safety. 

If one if the elements in the checklist does not 

work properly, ask your registered dealer to check it and 
have it repaired if necessary before using the vehicle. 

INSPECTION BEFORE SETTING OFF

• Check the fuel level. 
• Check the level of the engine oil. 
• Check the coolant level. 
• Check operation of the lights, flashers, horn, and brake 

light. 

• Check the tyre wear and condition. 
• Check the tyre pressure. 
• Check that the throttle is working properly. 
• Check that the central and side stands can be unfolded 

smoothly. 

• Check that the rear-view mirrors are in the correct position. 
• Check that the brake levers are working and moving 

properly. 

If a brake lever feels soft when you actuate it, 
you must have it immediately checked by an 
authorised dealer. 

ADVICE FOR STARTING UP AND DRIVING

WARNING

Before using the vehicle for the first time, make sure you are 

familiar with all the controls and their respective uses. If you 
are not sure about the functions of any of the controls, your 
registered dealer can answer your questions and give you 
any help you may require. 

As exhaust fumes are toxic, the engine must be started in a 

well-ventilated area. It must never be allowed to run in a 
closed space, even for a short time. 

STARTING THE ENGINE

For greater safety, place the vehicle on its central stand 

before starting the engine. 

• The driver must carry the Smart-Key key on his/her 

person.

• Turn the rotating knob to "ON".
• Ensure that the emergency stop button is in the 

 

position.

• Wait for the end of the instrument panel self-test.
• Ensure that the throttle is in the OFF position.
• Press one of the brake levers while pressing the starter 

button 

. Do not press the starter for more than 

10 seconds.

• Release the starter button as soon as the engine starts.

If the engine does not start, release the starter 
button and the brake lever, wait a few seconds 
and try again. 

DRIVING

Starting off

The vehicle is on its stand with the engine running. 

• Hold the handlebar with the left hand and the grab handle 

with the right hand and push the vehicle forwards to fold 
the central stand. 

• Sit on the vehicle. 
• Release the electric parking brake if necessary.
• To start the vehicle, gradually twist the throttle with your 

right hand. 

Accelerating and decelerating

To accelerate, turn the throttle towards (A). To slow down, 

turn the throttle towards (B).

Braking

This vehicle is fitted with an integral braking system. 

This system is controlled by the left hand or right foot and 

facilitates use of the vehicle by acting on the front and rear 
brakes simultaneously. 

The right brake is a secondary service brake which only acts 

on the front brake and supplements the integral braking 
system in case of emergency. 

• Close the throttle. 
• Operate the integral brake by progressively increasing the 

pressure. 

Avoid braking suddenly on wet roads or in 
bends. 

Reduce speed on steep slopes to avoid 
prolonged braking, as overheating will reduce 

braking efficiency. 

B

A

Summary of Contents for METROPOLIS 2019





























Reviews: