8/24
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
PEUGEOT METROPOLIS
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
DISPLAY FUNCTIONS
1.
Clock.
2.
Engine temperature gauge.
3.
Tyre pressure monitoring.
4.
Battery charge indicator.
5.
Outside temperature gauge.
6.
On-board computer.
7.
Maintenance indicator.
8.
Fuel gauge/Fuel reserve gauge.
A. Display control knob.
1 - Clock.
The clock can only be adjusted in the odometer position
using the settings button (A).
• Pressing the settings button for longer than 3 seconds
causes the two figures for the hours to flash.
- Set the time by successive pushes on the control
button.
• Pressing the settings button for longer than 3 seconds
causes the tens figure for the minutes to flash.
- Change the tens figure for the minutes by successive
presses on the settings button.
• Pressing the settings button for longer than 3 seconds
causes the units figure for the minutes to flash.
- Press the settings button for more than 3 seconds to
validate the clock setting.
2 - Engine temperature gauge.
The operating temperature is
indicated by the display of
6 segments; the min. and max.
levels are indicated by the letters C
and H in segments 1 and 6.
The high temperature warning is
indicated by the 6 segments
flashing simultaneously with the
"temperature" symbol (t) and the
letter H. You are advised to switch
of the engine and check the coolant
level after it has cooled down. If the level is correct, have
the vehicle checked by an approved dealer.
3 - Tyre pressure monitoring.
The tyre pressure monitoring system is a system which
automatically checks the tyre pressure.
Each wheel has a sensor fitted in the inflation valve which
periodically measures the tyre pressure. The system
informs the driver that the tyres are sufficiently inflated
and warns him/her if the pressure is insufficient of if there
is a leak.
The tyre pressure monitoring system is a
driving aid and is not a substitute for vigilance
or the driver's responsibility.
Each of the wheels on the
vehicle is represented by a
symbol.
a.Front right wheel.
b.Front left wheel.
c.Rear wheel.
If a symbol flashes, the tyre
pressure in question is less than:
• 1.3 bars for the front wheels.
• 2.1 bars for the rear wheel.
Check the tyre pressure as soon as possible.
This check must be carried out cold.
If a symbol goes out with an audible beep, the
diagnostic function has detected an
abnormality in the system for the tyre in
question. The system must be checked by an
approved dealer.
The tyre pressure monitoring system may be
temporarily disturbed by radio emissions of a
nearby frequency.
8
2
4
3
6
5
A
7
1
t
a
b
c
Summary of Contents for METROPOLIS 2019
Page 1: ...PEUGEOT METROPOLIS...