WORKING ON THE ENGINE WITHOUT REMOVING THE ENGINE
23
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
- Remove one of the spring clips (2) using pliers
P/N 752000.
- Remove the gudgeon pin.
- Remove the piston.
- Remove the needle bearing race from the
connecting rod end.
When refitting the cylinder, we recommend locking the piston using the fork part number 756575
in order to facilitate assembly.
Removal of the water pump.
- Remove the exhaust.
- Disconnect the lower pump from the coolant
pump to drain the cooling system.
- Disconnect the upper hose.
- Remove the water pump.
2
756575
Summary of Contents for Jet C-Tech
Page 1: ...Sales division Technical network leadership WORKSHOP MANUAL ...
Page 27: ......
