Starting the engine
- With the electric starter
For safety reasons :
- Put the scooter on its central stand
The electric starter will not work unless you squeeze the left
brake lever.
To start the engine :
- Turn the ignition key to the position
- Squeeze the brake lever
- Press the starter button
- Release the button when the engine starts
When the engine is cold, keep the throttle closed.
Precautions
Never run the engine in a closed room. Exhaust gases
contain carbon monoxide and toxic gases.
Stopping the engine and
parking
After stopping the scooter :
- Only turn off the ignition when the engine is at idling
speed
- Put the ignition key to
- Put the vehicle on its stand
- Remove the key to prevent risks of theft
- Parking on the stand
- Avoid driving or parking on easily inflammable
materials (eg : dry leaves, …)
The stand is fitted with a lever to park the scooter easily.
- Move to the left side of the scooter
- Hold the scooter by its handlebar and the grab handle
at the back of the saddle
- Push the stand lever with your right foot while pulling
the scooter backwards with the handlebars and the
saddle's grab handle
- Placing on side stand *
Bearing in mind that the isde stand is equipped with an
automatic lift mechanism, be careful when carrying out
different operations on the vehicle.
Caution
Make sure that the vehicle is stable on its stand so that it
cannot fall over and possibly cause any body wound or
any damage to the scooter.
* According to the model
A
B
A
12
A
B
Summary of Contents for ELYSEO 125
Page 1: ...Owner s manual ...