PEUGEOT ELYSEO 125, Manual

Page: 10 / 22

maxi
mini
A
B
Checking the coolant level
(Frequency : see maintenance booklet)
- Minimum level. : the coolant is visible at
the bottom of the container (expansion vessel),
- Maximum level. : fill the container up to
the rim (to the bottom of the screw thread)
Danger
Never remove the plug from the expansion
vessel when the engine is hot. The pressurised
coolant might be projected and could cause
serious burns.
It is essential that the used coolant be
deposited at a recycling point.
Warning
Do not use the vehicle :
- If the coolant level is lower than the
minimum level
- If there is a leak
- In the event of high consumption of
coolant
In all cases, you will cause irreversible damage
to your vehicle.
Contact a Peugeot dealer for maintenance and
repair.
Checking the level of coolant is carried out with
the engine cold and at a standstill :
- Put the vehicle onto its central stand on level
ground
- Using a flat screw driver, remove the
protection cover
- Loosen the plug on the expansion vessel
- The coolant level must always be above the
minimum level
- If necessary, top up with a similar coolant,
making sure that there is always a summer and
winter protection
- Retighten the plug of the expansion vessel
- Replace the protection cover
B
A
9