26-05-2003
YOUR 406 IN DETAIL
97
To set the alarm to external
protection only.
If you want to leave a window
partially open, or a pet inside the
vehicle, you need to select external
protection only:
• Switch off the ignition.
• Within the next ten seconds, press
the internal protection button
1
until the light comes on.
• Get out of the vehicle.
• Press the locking button on the
remote control.
• The doors lock.
• The direction indicators light for
two seconds.
• The red light on the switch flashes
once a second.
To disarm external type protection
only
☞
see "Disarming" section.
Note:
if you wish to charge or replace
the battery:
• Turn on the ignition.
• You have 10 seconds after turning
on the ignition to press the internal
protection switch
1
and hold it
down for two seconds.
• The warning light flashes rapidly
for three seconds.
• Disconnect the battery.
• After reconnecting the battery,
lock, then unlock the vehicle using
the remote control.
Do not make any modifi-
cations to the alarm sys-
tem, this could cause
faults.
