26-05-2003
Lighting
rheostat
With the lights on, press the button to
vary the intensity of the lighting of the
instruments and controls. When the
lighting reaches the minimum (or
maximum) setting, release the but-
ton then press it again to increase (or
reduce) the brightness.
As soon as the lighting is of the
required brightness, release the
button.
Trip recorder
zero reset
With the ignition on, press the button.
Instrument panel display
After switching on the ignition, three functions are shown in succession:
– engine oil level indicator,
– service indicator,
– total distance recorder.
Engine oil level
When the ignition is switched on, the engine oil level indicator is displayed
for approximately five seconds, then the service indicator is displayed for
five seconds.
Maximum
Use the dipstick to confirm the level on the indicator; a surplus of
oil can cause damage to the engine.
Contact a PEUGEOT dealer as soon as possible.
Minimum
Check the level with the dipstick and top it up. The indication is
only correct if the vehicle has been on stable, level ground, with
the engine stopped, for 10 minutes.
No oil
It is essential to top up the oil to the correct level, otherwise there
is a risk the engine will be damaged.
YOUR 406 IN DETAIL
123
