PEUGEOT 208 2017, Handbook

Page: 164 / 304

162
In the event of a breakdown
Spare wheel
Access to the tools
List of tools
1. Wheelbrace.
For removing the wheel trim and the
wheel fastening bolts.
2. Jack with integrated crank.
Used to raise the vehicle.
3. "Bolt cover" tool.
For removing the bolt protectors (covers)
on alloy wheels.
4. Socket for the security bolts.
For adapting the wheelbrace to the
special "security" bolts.
5. Towing eye.
For more information on
Towing , refer to
the associated section.
The tools are installed in the boot under the
floor.
To gain access:
F
open the boot,
F
lift the floor and remove it,
F
remove the carrier box containing the tools.
All of these tools are specific to your
vehicle and may vary depending on the
level of equipment.
Do not use them for any other purposes.
The jack must only be used to change
a wheel with a damaged or punctured tyre.
Do not use any jack other than the one
supplied with this vehicle.
If the vehicle does not have its original
jack, contact a PEUGEOT dealer or a
qualified workshop to obtain the correct
jack for it.
The jack meets European standards,
as defined in the Machinery Directive
2006/42/EC.
The jack does not require any
maintenance.
Procedure for changing a damaged wheel with
the spare wheel using the tools provided with
the vehicle.
Wheel with hub cap
When refitting the wheel
, refit the hub
cap starting by placing its notch facing the
valve and press around its edge with the
palm of your hand.