DISASSEMBLY
26
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Removal of the secondary transmission
cover.
Note: Use a drip pan to catch the transfer
box oil when the cover is removed.
Filling and checking the transfer box oil level is
through the cap (1).
- Remove the transmission cover 5 fixing bolts.
- Remove the cover with the primary shaft (2).
- Tightening torque: 1 m.daN.
Note: The primary shaft can be drifted out
of the cover using a mallet.
Removal of the secondary transmission.
- Remove the 2 centring pillars and the paper
gasket (1).
- Remove the first friction washer (3) from the
intermediate shaft (4).
- Remove the secondary shaft (5).
Note: Make sure not to damage the gasket
on the wheel side when removing the
secondary shaft.
In case the gasket is damaged, oil will flow
through the casing's drain hole (A) located
between the gasket (on the wheel side) and the
bearing.
2
1
2
1
5
4
3
A
