DISASSEMBLY
25
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Checking the crankshaft and conrod
assembly.
- Using a set of shims, check the big end side
play.
- The maximum side play on the conrod end
must not exceed: 7/10 mm.
The out-of-round values measured on the ends
of the crank should not exceed 5/100 mm and
must be measured:
- 30 mm from the transmission side end.
- 35 mm from the flywheel magneto end.
30 mm
35 mm
