26
1.
Follow steps 1 to 6 of timer /Powerhead
replacement.
2.
Remove three screws from the plate on the
valve body.
3.
Remove the plate from the valve body and pull the
Piston Assembly from the valve. The brine valve
assembly can also be removed in this stage.
4.
Remove the seal spacer assembly, grease it
with silicone lubricant and put back in.
5.
Replace piston assembly followed by timer assembly.
6.
Replace the piston assembly and reverse
following steps in this section
Remove 3 X
Screws
Plate
Seal and
Spacer
Brine Valve
Assembly
Piston
Assembly
Remove front cover
Remove 2 screws
1.
Remove front cover
2.
Remove 2 screws shown
3.
Remove microswitch
4.
Remove pin
5.
Remove 7 body screws
6.
Remove cam assembly
7.
Remove 4 screws
8.
Remove Idler gear
9.
Remove mounting plate
1.
5.
6.
8.
9.
2.
3.
4.
Remove pin
Remove 7 body
screws
7.
Remove 4 screws
Remove cam
assembly
Remove Idler
gear
POWERHEAD REPLACEMENT
PISTON AND/OR BRINE VALVE ASSEMBLY REPLACEMENT