MaINTENaNCE
88
Extendo and Traverse Operation and Maintenance Manual
800-GO-PETTIBONE
WaRNING
a
flying Debris Hazard
Remove all trash and debris when work projects are
•
completed.
Double check the engine area and exhaust system.
•
Check that all guards and covers are installed
•
correctly.
Metal chips or debris can cause eye injury. always
•
wear eye or face protection when using a hammer
on this machine. Use a hammer with a soft face,
such as brass, to drive hardened pins.
Do not leave loose tools and rags on the machine.
•
Entanglement Hazard
avoid loose fitting clothing, loose or
uncovered long hair, jewelry or loose
personal articles.
fire and Explosion Hazard
•
Before starting electrical equipment,
walk around the machine and check for
oil, fuel or other fluid leaks.
Never use a shop rag to wipe up excess fuel. Vapors
•
from the rag are flammable and explosive.
Dispose of all flammable liquids in approved
•
containers.
Disconnect battery.
•
Handle fuel carefully. Do not smoke while filling fuel
•
tank or working near fuel.
Crush Hazard
•
Lower boom to ground, shut down
machine to a zero energy state and
remove key from ignition before
beginning work.
Do not support the machine, the boom, or any
•
attachments on cinder blocks, hollow tiles or props
that may crumble under a load.
Do not work under a machine that is supported
•
solely by a jack.
Injection Hazard
Relieve all hydraulic pressure in the hydraulic
•
reservoir by removing the hex plug on the top of
the tank before breaking any hydraulic connection
or before opening the reservoir access cover.
Keep hands and body away from any pressurized
•
leak.
Burn Hazard
allow machine to cool before beginning
work.
fall Hazard
Make sure that all walking and climbing surfaces are
clean.
Uncontrolled Movement Hazard
Before servicing the machine, put a “DO NOT
•
OPERaTE” tag on the instrument panel.
If it is necessary to have the engine running while
•
servicing the machine, have another person assist
with the procedure.
Do not leave the operator’s seat with the engine
•
running.
Summary of Contents for Extendo 1032
