PETTIBONE Extendo 1032, Operator'S Manual

Page: 62 / 120

fORKLIfT OPERaTION
54 Extendo and Traverse Operation and Maintenance Manual
800-GO-PETTIBONE
Position the steering selector switch in the desired 4.
steering mode.
Raise the forks by pulling the front joystick to the 5.
rear until a safe travel height is reached.
Depress the brake pedal and hold. Move the 6.
transmission selection lever forward (f) to move
forward or back (R) to move in reverse. Rotate the
twist grip on the transmission selection lever to first
gear (1), second gear (2), third gear (3) or fourth
gear (4).
Continue to hold the brake pedal down and release 7.
the parking brake switch. WaRNING! Uncontrolled
Movement Hazard. select your intended direction.
In 2-WHEEL sTEERING mode, this forklift is capable
of moving at 20 MPH in forward and 20 MPH in
Reverse. WaRNING! Crush Hazard. Clear the area.
Drive the forklift by carefully releasing the brake
pedal while depressing the throttle pedal as
required.
Transmission selector 1 –
Joystick 2 –
frame sway 3 –
Ignition switch 4 –
accelerator 5 –
Brake Pedal 6 –
fixed Boom figure 39.