background image

28 

+1 (800) 732-2677

 

petsafe.com 29 

Australia/New Zealand

—In compliance with the Australian Consumer Law, Warranties Against Defects, effective January 1, 

2012, warranty details of this Product are as follows:

One Year Non-Transferable Limited Warranty

What is covered: Radio Systems Australia Pty Ltd. (hereinafter referred to as “Radio Systems”) warrants to the original retail 

purchaser, and not any other purchaser or subsequent owner, that its product, when subject to normal and proper residential 

use, will be free from defects in material or workmanship for a period of one (1) year from the purchase date. An “original retail 

consumer purchaser” is a person or entity who originally purchases the Product, or a gift recipient of a new product that is 

unopened and in its original packaging. When serviced by Radio Systems Customer Service, Radio Systems covers labour and 

parts for the first year of ownership; after the first year, a service or upgrade charge will apply relative to replacement of the 

product with new or refurbished items at Radio Systems’ sole discretion.
The limited warranty is non-transferable and shall automatically terminate if the original retail consumer purchaser resells 

the Radio Systems product or transfers the property on which the Radio Systems product is installed. This Limited Warranty 

excludes accidental damage due to dog chews; lightning damage; or neglect, alteration, and misuse. Consumers who purchase 

products outside of Australia, New Zealand, or from an unauthorised dealer will need to return the Product to the original 

place of purchase for any warranty issues.
Please note that Radio Systems does not provide refunds, replacements, or upgrades for change of mind, or for any other 

reason outside of these Warranty terms.
Claims Procedure: Any claim made under this Warranty should be made directly to Radio Systems Australia Pty Ltd. Customer 

Care Centre at:
Radio Systems Australia Pty Ltd. 

PO Box 3442 

Australia Fair QLD 4215, Australia

Australia Residents: 1800 786 608 

New Zealand Residents: 0800 543 054 

Email: [email protected]
To file a claim, a proof of purchase must be provided. Without a proof of purchase, Radio Systems will not repair or replace 

faulty components. Radio Systems requests the Consumer to contact the Radio Systems Customer Care Centre to obtain a 

Warranty Return number, prior to sending the Product. Failure to do so may delay in the repair or replacement of the Product.
If the Product is deemed to be faulty within 30 days from date of original purchase, Radio Systems will organise for a 

replacement to be sent in advance of returning the faulty Product. A Post Bag will be included with the replacement Product 

for the return of the faulty Product. The Product must be returned within 7 days of receiving the replacement. If the Product is 

deemed to be faulty after 30 days from the date of original purchase, the consumer will be required to return the Product to 

Radio Systems at the consumer’s own expense. Radio Systems will test and replace the faulty unit or its components and return 

to the consumer free of charge, provided the Product is within its said warranty period. This warranty is in addition to other 

rights and remedies available to you under the law. Radio Systems goods come with guarantees that cannot be excluded under 

the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other 

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of 

acceptable quality and the failure does not amount to a major failure.
Should you have any queries or require any further information, please contact our Customer Care Centre on 

1800 786 608 (Australia) or 0800 543 054 (New Zealand).

Summary of Contents for Stubborn Dog In-Ground Fence ZIG00-14658

































Reviews: