Petsafe PIG00-17440, Manual

Page: 21 / 41

21
Use an existing fence
You can attach the boundary wire to a chain link fence, split rail fence or a wooden privacy fence. The boundary wire can be attached as
high as needed; however, make sure to set the boundary distance at a high enough range for your pet to receive the signal.
Chain link fence
Weave the boundary through the links or use plastic quick ties.
Wooden split rail or privacy fence
Use staples to attach the boundary wire. Avoid puncturing the
boundary wire insulation.
Double loop with existing fence
Run the boundary wire on top of the fence and return it on the
bottom of the fence to get the 5-foot separation needed.
Gate (single loop)
Bury the boundary wire in the ground across the gate opening.
Gate (double loop)
Bury both boundary wires across the gate opening while keeping
them 5 feet apart.
The signal will still be active across the gate, preventing your pet
from passing through the open gate.
Staple wire into fence
Weave wire into fence
Single loop
Double loop
5 ft
5 ft