petsafe.com 15
5. Check the tightness of the receiver collar
by inserting one finger between the end
of a contact point and your pet’s neck.
The fit should be snug but not
constricting (
G
).
6. Allow your pet to wear the collar for
several minutes then recheck the fit.
Check the fit again as your pet becomes
more comfortable with the receiver collar.
7. Trim the collar as follows (
H
):
a. Mark the desired length of the
receiver collar with a pen. Allow for
growth if your pet is young or grows a thick winter coat.
b. Remove the receiver collar from your pet and cut off the excess.
c. Before placing the receiver collar back onto your pet, seal
the edge of the cut collar by applying a flame along the
frayed edge.
8. Put battery in receiver collar.
G
H
