petsafe.com
5
Setup and Assemble Feeder
1. Remove the components located inside the food hopper.
2. We recommend you wash and rinse the bowl, bowl
holder, food hopper, lid and conveyor. Once parts are
dry, ensure a conveyor belt lip is aligned with the arrows
on the side. Replace the conveyor and food hopper.
3. Plug in the power adapter. If you want, install (4) D-Cell
alkaline batteries in case of a power outage. The LED
will blink yellow indicating the feeder is on and in
setup mode.
Note:
Batteries are for back-up power only and should
not be used as the main power source.
4. Place the bowl into the bowl holder. Lift feeder and slide
the holder notch into the groove on the bottom of
the feeder.
