6
Customer Care 1 (800) 732-2677
Function and Response
Function
LED Light Response
Beep Response
Spray collar is turned on Green LED illuminates
Beeps low to high
Spray collar is turned off Red LED illuminates
Beeps high to low
Collar is on
Green LED light flashes once every 5 seconds
None
Spray activation
None
None
Low battery condition
Red LED light flashes 3 times every 5 seconds
None
Low spray warning
Yellow LED flashes once every 5 seconds
and the battery is good
Yellow LED flashes 3 times every 5 seconds
and the battery is low
None
No refill cartridge
Red and green LED’s alternate flashing for 5 seconds, and
the collar will turn off
4 beeps
Spray collar is on/
Cartridge is empty (will
not spray)
Yellow LED flashes once every 5 seconds
and the battery is good
Yellow LED flashes 3 times every 5 seconds
and the battery is low
None
Turning collar on/
Cartridge is empty (will
not spray)
Yellow LED flashes 2 times
2 beeps
Charge the Remote
1. Lift the rubber cover protecting the remote charging jack on the
back of the remote.
2. Connect the charger to the charging jack (
2A
).
3. Plug the charger into a USB port or if you have an adaptor, plug it
into a standard wall outlet.
4. The battery indicator will display when fully charged.
5. When the remote is fully charged, replace the rubber cover.
NOTE:
The remote is always on, and the display will appear when any
button is pressed (
2B
).
Tone Symbol:
Delivers a tone with non-adjustable
volume to the collar.
Vibration Symbol:
Sends 1 non-adjustable level of
vibration stimulation to the collar.
Spray Symbol:
Delivers 1 level of spray stimulation.
Dog 1/2:
Indicates which training collar is active.
Battery Indicator:
Indicates the amount of battery
remaining in the remote.
2A
2B
Tone
Vibration/
Spray
Dog 1
Dog 2
Level Adjuster
0=Vibration
5=Spray
