DE
NL
IT
FR
ES
EN
www.petsafe.net 9
8 www.petsafe.net
Connecting Cat flap to Computer
With the Computer Application, you have the
option
to connect your Cat Flap to your computer to complete the “Initial User Setup” steps and to
program the Cat Flap instead of using the Cat Flap Control Panel. Again, the Computer Application is optional but NOT required to operate your
Cat Flap. Connecting the Cat Flap to your computer also allows you to check for and install computer application software and Cat Flap
firmware updates.
to use Cat flap with your computer, you need:
• Internet connection for your computer
• PC or Mac with a USB 2.0 port and one of the following operating systems:
- Windows
®
XP, Windows
®
Vista, Windows
®
7 or 8
- Mac OS 10.5 or newer
• Minimum 1 GHz processor
• Minimum 1 GB Ram
• 30MB hard drive space
Connecting to your computer:
Use the included USB cable to connect the Cat
Flap to the USB Port on your computer.
Downloading Software:
Open your browser and visit
http://connect.petsafe.net.
Click the “Register” button and complete registration steps.
Battery operation
An optional, rechargeable lithium-ion battery is available to use with the Passport
™
Intelligent Cat Flap (sold separately). The Passport
™
Rechargeable Battery can be used for full operation of the Cat Flap or as a battery back-up option in case of a mains power loss.
prepare, SetUp, anD teSt
Install Clock Battery and power adaptor
The Cat Flap is shipped with the Clock Battery not installed. The 3-V lithium coin cell battery (size CR2032) will
need to be installed before proceeding with setup, testing and installation. The battery is required to keep the
clock’s time during any power loss. Typical battery life is about 1 year with normal use and operating power
from Power Adaptor or optional rechargeable lithium-ion battery (sold separately). With no operating power,
the expected Clock Battery life is about 10 weeks. When Clock Battery needs replaced, if battery has not been
installed, or if installed incorrectly, you will receive an alert on the LCD Screen.
to install Clock Battery:
Remove Clock Battery Cover from back of
Interior Frame. Battery slot is located on left side of circuit board. Insert
battery with positive (+) side facing the right side of the battery slot.
Make sure battery is fully inserted. Reinsert Battery Cover and push to
snap into place.
notICe
Read this entire guide prior to cutting or modifying an opening in your door or wall. Do not proceed with cut-out or installation until your Cat
Flap is assembled, powered up, programmed for your cat and all steps under “Prepare, Setup and Test” have been completed.
Pull and lift
here
