4
Customer Care Center 1-800-732-2677
Installation Instructions
Step
1
Step
2
Determine Pet Door Location
1A
1B
1A
Measure and mark your pet’s shoulder height on
the door.
1B
Determine location for the pet door. Draw a
vertical center line through the shoulder height line
using a level.
IMPORTANT
If homeowner’s door or other application is
not level, the pet door must be marked level to
swing properly.
Preparing Door
2A
2B
2C
2A
Remove door from hinges.
2B
Place on a raised level surface such as
saw horses.
Helpful Tip:
Clamp or weigh down the door to
prevent it from moving.
Note:
The Pet Door can be installed with the
door hanging based on your skill level.
2C
Cut out the correct template size. Match the
marked lines on the door with the shoulder and
center lines on the template. Tape the template
in place and carefully trace template. Make sure
to trace underneath tape and connect the corners.
Now, remove the template and any excess tape
from the door.
IMPORTANT
When applying template there should be a
minimum of 3” between the bottom and sides
of the door and the outer edge of the template
to maintain the structural integrity of the door.
