Petsafe Freedom Series Installation Manual Download Page 2

Customer Care Center 1-800-732-2677

Important Safety Information

Explanation of Attention Words and Symbols used in this guide

This is the safety alert symbol. It is used to alert you to potential personal 
injury hazards. Obey all safety messages that follow this symbol to avoid 
possible injury or death.

WARNING

WARNING indicates a hazardous situation which, if not avoided, 
could result in death or serious injury.

CAUTION

CAUTION, used with the safety alert symbol, indicates a 
hazardous situation which, if not avoided, could result in minor or 
moderate injury.

NOTICE

NOTICE is used to address safe use practices not related to       
personal injury.

WARNING

• When children are present in the home, it is important to 

consider the pet door during child proofing activities, the pet 

door may be misused by a child resulting in the child accessing 

potential hazards that may be on the other side of the pet 

door. Purchasers/Homeowners with swimming pools should 

ensure that the pet door is monitored at all times and that 

the swimming pool has adequate barriers to entry. If a new 

hazard is created inside or outside of your home, which may 

be accessed through the pet door, Radio Systems

®

 Corporation 

recommends that you properly guard access to the hazard or 

remove the pet door. The closing panel or lock, if applicable, 

is provided for aesthetic and energy efficiency purposes and is 

not intended as a security device. Radio Systems

®

 Corporation 

will not be liable for unintended use and the purchaser of this 

product accepts full responsibility for oversight of the opening 

it creates.

• Power Tools. Risk of severe injury; follow all safety instructions 

for your power tools. Be sure to always wear your safety 

googles.

CAUTION

The user, prior to installation, must become familiar with all 

building codes that may affect the installation of the pet door 

and determine, along with a licensed contractor, its suitability 

in a given installation. This pet door is not a fire door. It is 

important for the owner and contractor to consider any risks that 

may be present inside or outside of the pet door, and any risks 

that may be created by subsequent changes to your property 

and how they may relate to the existence and use, including 

misuse of the pet door. 

NOTICE

Keep these instructions with important papers; be sure to 

transfer these instructions to the new owner of the property.

Summary of Contents for Freedom Series









Reviews: